manufacture photo Frames With Diy Framing Tools

manufacture photo Frames With Diy Framing Tools

Imagine being able to frame your own photographs, prints, tapestries, and artwork as well as a professional. Photograph framing is de facto quite fun and easy to Diy. There are 5 easy steps to framing.

Step 1 - How to Cut Mats

Framing Nails Degree

Adding a colour border (the mat) nearby your artwork enhances the Photograph and provides a restful area in the middle of the image and the Photograph frame. The colour and size of the mat board must be decided first, as this will determine the allinclusive dimensions of your Photograph frame. You start by calculating the external size of the mat.

To cut the mat use a good capability bevel mat cutter and ruler. There are several cutting systems to suit various budgets and skill levels, together with the Mat devotee Model 660 for the hobbyists, to the Mat devotee 860B or 1060B for the keen home Photograph framer.

Mark the borders to be cut on the back of the mat board.

Make sure the mat will cover the edges of the artwork, by subtracting approx. 3mm or 1/8" from the image size (length & width). Cut the mat following the instructions for your mat cutter. Attach the Photograph to the mat using 2 small pieces of acid free tape on the top edge only.

Step 2 - How to Cut the Photograph Frame

How much Photograph frame moulding material will I need? determined portion the Photograph and mat you wish to frame. Add an extra (3mm) for "play" to ensure the Photograph fits de facto into the finished Photograph frame.

Add the length (L) and width (W) together, then multiply the total by 2 to give you the allinclusive length. You also have to allow for the mitre cuts, so multiply the width (W2) of the moulding by 10 and add this to your total.

(L + W) x 2 + (W2 x 10) = Total

Making the 45 degree mitre cut in your framing material is most prominent - your joining will only be as good as your cutting. All the time use a good capability manual Mitre Saw... We suggest the Proman hand saw which is made in Sweden as the best on the market. Electric powered Drop Saws are not ideal for cutting small delicate Photograph frames.

Good portion law helps to make measuring easy and eliminates many mistakes. Once you have cut the first mitre, slide the Photograph frame material along to the required length on the measuring scale, and set the stop. You are now ready to cut the first 2 pieces of your Photograph frame. Convert the settings to cut the other 2 sides of the frame.

Cutting one side for a frame is easy.

Cutting the second side to be be the same as the first, is the hard part. With the FrameCo Ezy-Measure law you can cut accurately everytime.

Step 3 - How to Clamp Frames

How do you Clamp the Frame? Clamping the frame tightly is valuable for good joining. You can use the a Cord Clamp, or the Steel Strap Clamp to collect the Photograph frame ready for joining.

The advantage of the Strap Clamp is that you can see all the four corners of the Photograph frame clamped together before joining. So alignment of the corners is easy.

All corners should match up evenly. Apply a diminutive wood glue to all corners of the frame for added strength. determined tension the clamp making sure that the corners are aligned then collect the clamp tightly.

You are now ready for joining.

Step 4 - How to Join Frames

Most Photograph frames are joined with a V-Nail. This is the easiest recipe and it is what the expert Photograph framer uses. The FrameCo PushMaster joining tool, inserts V-Nails into the angle of the frame. Two V-Nails in each angle is commonly all that is necessary.

The PushMaster can be used by hand alone on most Photograph frames, or you can tap the PushMaster with a mallet if the frame is hardwood. The PushMaster can be upgraded to the BenchMaster® which will insert V-Nails into the harderst of timbers.

V-nails: How do they work?

Upon entry, the sides of the V-Nail are deflected outwards. As it pulls back into its traditional shape, the join is pulled together. The diminutive curl on the edge of the V-Nail locks the nail into the grain of the timber. Glue alone is not enough for strong stable joints, by adding a V-Nail you achieve a strong, tight joint. Which V-Nail size . . . You use a V-Nail about 1/2 the frame height.

Sizes are: 7mm - 1/4", 10mm - 3/8", 12mm - 1/2", 15mm - 5/8"

Step 5 - How to conclude Frames

Take the empty Photograph frame to a glass merchant and have them cut a piece of glass for you. If you wish to cut glass yourself use a good capability oil filled cutter, or the Glass Cutter. Use only 2mm plain or non-reflective glass.

Fome Core is the ideal backing board as it is light weight, acid free and easy to cut. You can also use 3mm Mdf or cardboard. Place the empty frame face down and insert the glass, then the matted Photograph and lastly the backing board.

Use the PushMaster to insert brads or flexipoints into the rear of your Photograph frame to hold all in place.

Use Backing Nails for large frames or heavy items. Flexipoints are flexible and ideal for needlework or when you want to re move the picture, eg. Photo frames.

To seal the artwork in the frame, tape over the brads/flexipoints using a good capability backing tape. This will preclude dust or insects getting into the picture.

To hang your picture, again use your PushMaster tool. portion one third down the side of the Photograph frame from the top and mark that spot. Place a screw eye into the slot provided in the end of the Pushmaster tool, then screw the eye into the frame. Repeat on the other side and then attach wire from one side to the other.

You have now completed your Photograph framing project. More data about how to make Photograph frames can be viewed at http://www.clubframeco.com/5_steps_Introduction.html

manufacture photo Frames With Diy Framing Tools

Check Price on - Framing Nails Degree Products

Stainless Steel Cookware Set Copper Bottom - Kitchenware Set - Copper Clad Set - T-Fal Ultimate Set Minidisc Players Portable Audio - Portable Audio & Video - Recorders - Personal Audio